our products


Your Most Reliable Supplier From China

contact us


Dancing Stand

Detailed Description of Installation and Important Notes for Proper Use of Dancing Display Stands

Description of Installation

Our eye-catching dancing display stand for shops, exhibitions and homes can be installed easily in just a few minutes anywhere. During reading of this description, you may refer to the animated sample picture displayed in the right side.

Each level of the Dancing Stands shall be disassembled separately for package and shipping. Please read the following instructions carefully BEFORE you begin assembly.

Inspection:

Carefully open the package and check if there are any damaged or missing parts. Make sure that all the joints are smooth except the joints connected to the motor on the bottom. In case inspection result is ok, please go to next step.

Installation of the curly poles:

Lay the bottom shelf down on the floor and insert 4 curly poles. Make sure that the surface of the curly pole is leveled with the bottom shelf before insertion. Do not force insertion or use a hammer (you may break the parts). Insert each curly pole one at a time.

Installation of the middle shelves (with openings on both sides of the four spherical corners):

Turn all the curly poles in the same direction as the main curly pole (the one hooks to the motor). Level the middle shelf with all four curly poles. Insert the middle shelf into the four curly poles slowly and with slight force. (Roxsson, a Chinese manufacturer and supplier of dancing stands). Follow the instructions above to assemble the remaining curly poles and middle shelves. Finally, assemble the top shelf (with opening only on one side).

Tighten the screws on all the curly poles using a small-sized and (-) shaped screw. Do not use a large-sized screw (you may damage the curly poles).

Testing:

After assembly, check to make sure that the voltage and electricity are compatible before plugging. After plugging, press the button on the bottom shelf to turn on the Dancing Stand. Press one more time to turn it off. If the Dancing Stand is running smoothly, the assembly has succeeded. If not, please check to make sure that all the above instructions has been followed correctly.

 


   


   

Important Notes for Proper Use

Before using the Dancing Stand for the first time, please check to see if it's sturdy and firm. Check to make sure the voltage and electricity are compatible.

Protection: Users may install an additional device to protect against power surge.

Please do not overload the Dancing Stand (otherwise it may be damaged or get stuck). The maximum load for each level of the shelf is 4KG.

Turn off the power button or unplug the plug when the Dancing Stand will not be used for a long period of time.

Enter to see more designs of dancing stands.

ENTER

 
You may search Google or our website directly here.

 
Google
 

Site Map: home - about us - our products - contact us

Dancing Stands -- Rotating Stands -- Temporary Wall System -- Temporary Stage System -- Store Display Stand  -- Store Display Fixture

Exhibition & Office Furniture -- Table/Desk for Exhibition and Office -- Chair/Stool for Exhibition, Office and Bar -- Acrylic Stand

 Shopping Cart and Basket -- Store Display Fixture -- Maglev Display -- Promotion Umbrella -- Inflatable Promotion Products -- Promotion Table

Pop-up Display -- X-banner Stands -- L-banner Stands -- Roll-up Displays -- Banner Screen Stands -- High & Wide Screen Stand -- Light Box

 

Roxsson Display Co., Ltd.  All rights reserved.